Pinball Record Archives - Pinball Adventures

Injection Molding DIY & Process

Andrew MacBain — Thu, 14 Jan 2021 01:18:15 +0000

Looking to make a customized toy for your pinball machine? We got you covered with the DIY Injection Molding process and what you’d need!

Injection Molding DIY & Process

What Is Injection Molding?

It a process used for manufacturing a wide variety of items from small components to large ones. It uses a granular plastic that is gravity fed from a hopper, forced into a heated chamber by a screw-type plunger, melted, and then pressed against the mold. It then cools and is removed as a solid part. Rapid injection molding uses aluminum molds that are quick to make, while large-scale production typically uses steel molds.

Injection fabrication makes it possible to produce parts in large volumes. This is why it is typically used in mass-production processes, where thousands or even millions of parts are needed. The biggest drawback, really, is that the tooling time and costs required to set up for the molding process make the technique inappropriate for small batch production runs (luckily we have 3D printing for that now).

What You Need for DIY Injection Molding

Building a setup for DIY injection molding does require some investment. It takes both money and time to acquire the right equipment and to master using it. However, these costs are in many cases still lower than the cost of a single metal mold, so the eventual time and cost savings, once you’re up and running, will easily offset the initial effort. source.

Here’s what you’ll need to get started:

A high-performance desktop SLA 3D printer, like the Formlabs’ Form 3. The Form 3 can produce accurate molds with crisp features, and a smooth surface finish that will yield high-quality final molded parts. Beyond DIY injection molding, an SLA 3D printer is also a valuable asset for prototyping and other applications throughout product development.
A 3D printing material that can withstand the temperature and pressure on the mold during the injection molding process. We recommend the following materials for Formlabs SLA 3D printers:
- Rigid 10K Resin is an industrial-grade, highly glass-filled material, which provides a solution that can cope with a wider variety of geometries and injection molding processes. It has an HDT of 218°C @ 0.45 MPa and a tensile modulus of 10,000 MPa, making it strong, extremely stiff, and thermally stable.
- High Temp Resin offers a heat deflection temperature is 238 °C @ 0.45 MPa that is suitable for injection molding. This material is more brittle, but is recommended for materials with a high molding temperature and to reduce cooling time.
- Grey Pro Resin has a lower thermal conductivity than High Temp Resin or Rigid Resin, which leads to a longer cooling time, but it is softer and can wear hundreds of cycles.
A benchtop injection-molding machine, such as the Galomb Model-B100 or the Holipress. There are a number of benchtop injection molders on the market that vary in cost. Many of the lower cost molders use a hand-driven plunger, while some of the more expensive units use a screw or pneumatic system. Some of our customers have recommended systems from Minijector, Morgan, APSX, or Micromolder as well. Desktop automated molders such as the product line from Babyplast are good alternatives for mass production of small parts.
Plastic pellets of your choice
A CAD software tool of your preference to design the mold insert, such as Blender, which you can download for free

The injection molding process cycle follows 4 stages and typically takes between two seconds and two minutes per part

Clamping

This is the part where two halves of the molds are securely closed by the clamping unit. Hydraulic power is used to keep the clamping unit in place while the specific material is injected (typically a thermoplastic).

Injection

At this stage, raw plastic material or pellets are fed into the injection molding machine, pushed into the injection unit, melted and then injected into the mold.

Cooling

Cooling allows the molten plastic to solidify and take the shape of the mold. There are specific cooling times for different parts and components, depending on the maximum wall thickness of the part and the thermodynamic properties of the plastic material

Ejection

An ejection system is used to push the molded part out of the clamping unit. A mold release agent may be sprayed onto the surface of the mold cavity before injection to facilitate easy ejection and prevent damage to the new part.

What are the benefits of injection molding?

Low production costs

In injection molded manufacturing, the price per unit is extremely low. The most significant costs are the setup costs. As more parts are produced, the price tends to drop drastically. Once the initial costs of fabrication have been paid, the profit margin can be quite wide. This makes financial sense in the business front, so long as there is a demand to satisfy the production.

Low scrap rates

Unlike traditional manufacturing processes, where a substantial percentage of an original block or sheet is cut away during production, injection molding cuts with accuracy and waste plastic usually come from overflow material that leaks out of the cavity. It can also come from runners, sprue, and gate locations.

Repeatable and consistent

As a process used in high-volume production, injection molding is ideal for producing practically identical parts. Each part produced is going to be the same as the first one, which is important for consistency and reliability.

Of course, injection molding is not perfect. But its benefits often outweigh the disadvantages.

A major challenge in injection molding is designing a mold. The main focus is usually on the finished products, but no part would be made without the mold from which it is formed. The design aspect of a component is often overlooked, but it is the most important.

Thanks for reading

Injection Molding DIY & Process

PINBALL ADVENTURES

Pinball Adventures is a North American manufacturing company producing fresh and unique Pinball machines. Our goal is to create to the highest standards, and spark the same joy we found as gamers when we rolled our first quarter into that coin slot so many years ago. Stemming from a lifelong passion, Pinball Adventures is created by gamers, for gamers. We strive to bring high quality, innovative, and captivating experiences for all to enjoy.

Visit our website at pinballadventures.com and also check out our new Instagram page for more updates https://www.instagram.com/pinballadventures/

Pinball, Pinball Adventures, Pinball Buzz, Pinball, Pinside, History of Pinball, Pinball News, Pinball Updates, Origin of Pinball, Pinball Skill Shots, Pinball Canada, Vancouver Pinball, pinball relates to real life, collect pinball, shooter rods, Parts of a pinball machine, Move a pinball machine, most expensive pinball machine, guide to playing pinball, Largest Pinball Collection, hardest pinball game, 5 Classic Pinball Machines, Owning a pinball machine, 5 Cool Pinball Art From The 80’s , New Led Zeppelin Pinball, 3 Greatest Older Pinball Machines

The post Injection Molding DIY & Process appeared first on Pinball Adventures.

How The Pinball Expo Started

Andrew MacBain — Mon, 19 Oct 2020 00:01:36 +0000

How It All Started

The Pinball Expo started way back in 1985 by Robert Berk in Chicago which is known to be the city with the most pinball manufacturers. Robert started playing pinball as a child and was immediately drawn to it. He knew his dream was to be able to give recognition to his inspirations, which were the pinball designers and artists. With the help of his friends Bill Kurtz and Mike Pacak they were able to make Pinball Expo into a reality.

The trio held their first event over the weekend of November 22–24, 1985 at the Holiday Inn O’Hare/Kennedy in Rosemont, Illinois. The event attracted around 100 attendees from all parts of the world and a dozen vendors. The expo offers seminars, a tour of a pinball factory, an autograph session, tournaments, an exhibit hall of pinball machines, parts, and related paraphernalia, and much more. Source

The Pinball Expo 2020

After that they continued to host The Pinball Expo annually for 35 years and hopefully many more years to come. Due to COVID-19 this year, The expo was streamed online instead. Once there is a vaccine, the expo should be able to continue in the later years.

PINBALL EXPO 2020 ANNOUNCEMENT
Dear Friends of Pinball Expo,

The Governor of Illinois mandated all events of our size to remain closed until the state moves to Phase 5, which includes having a vaccination for Covid-19. Illinois, like many other states, is currently in Phase 4. We knew we had to take matters into our own hands, and we did. In keeping with the tradition of having a yearly show, we are excited to announce that we will be having a free virtual event, to be held October 15th – 17th, 2020. Included will be virtual factory tours, seminars, vendor showcases, and much more. Stay tuned to our website (www.pinballexpo.com), Facebook, Instagram, and Twitter for more information.

If you booked your 2020 room through our Pinball Expo block of rooms, the Westin hotel will automatically cancel your reservation and no charges will be applied. If you need to speak to someone at the hotel directly, please call them at 1-847-777-6500. In addition, if you paid for any event packages, tours, seminars, etc. through our website, you as well will receive a full refund.

We hope you can tune in for what will be a spectacular, action-packed, pinball fest! Thank you for your support and we wish you continued safety and good health.

Sincerely,

Robert Berk and The Pinball Expo Team

Source

The Growth of Pinball Expo

As early as Pinball Expo ’88, Rob Berk was championing the idea of a Pinball Expo Hall of Fame. In 1991 the Hall of Fame was created with the induction of Harry E. Williams, Sam Stern, Ray Moloney and David Gottlieb. The event is open to the general public. Ever since their first event, the expo kept on growing and growing over the years. Because they kept having annual events, without them realizing it they now holding the world record for the longest running pinball event in the Guiness Book of World Records. The Pinball Expo started from having a hundred to couple hundreds to now thousands of people (2019).

We wish Robert and his team the best and hope to see everyone at the next Expo!

PINBALL ADVENTURES

Visit our website at pinballadventures.com and also check out our new Instagram page for more updates https://www.instagram.com/pinballadventures/

Pinball, Pinball Adventures, Pinball Buzz, Pinball, Pinside, History of Pinball, Pinball News, Pinball Updates, Origin of Pinball, Pinball Skill Shots, Pinball Canada, Vancouver Pinball

The post How The Pinball Expo Started appeared first on Pinball Adventures.

When did multi-player games appear for pinball?

Andrew MacBain — Thu, 28 May 2020 04:17:13 +0000

Originally, machines were all single-player games. It was one player at a time. But starting in 1954, Gottlieb came up with the idea to have two or even four people playing at a time. Player one would play ball one, then player two would play ball one. Then player one would play ball two, and player two would play ball two. Suddenly it was more competitive.

The problem was that with electromechanical architecture, the amount of circuitry needed to support multi-player games came at the expense of game play. Basically, it meant that the games couldn’t be as complicated as far as game play and game features were concerned. So there was always this kind of wresting match—do you have a multi-player game that people can play more or less head to head, or do you have a single-player game where the rule set can be considerably deeper but with only one person playing at a time?

As far as collectors go, most collectors like single-player electromechanical games because the games are more involved and they have a deeper rule set. There’s more to do. With the advent of solid-state microcomputers and microprocessors, all games became multi-player just by default because now the game could remember.

pinhead, pinball, pinball-playing addict, backbox, Pinball Machine, BIFF, flipper, panic flip, Lazarus ball, Nudging, machine, ball, pinball video games, nudge, shake, bumpers, thumper, jet, pop, kick-out hole, ,gobble hole, drain, Ability, Achievement, Action, Arcade, Arrangement, Art, Artist, Artwork, Attempt, American Pinball, Chicago Gaming Company. Dutch Pinball, Haggis Pinball. HomePin. Jersey Jack Pinball. Multimorphic Inc. Penny K Pinball. Quetzal Pinball, Pinball Avdentures, Punny Factory, Ninja Mania, Sushi Mania, That’s Wack, Canada, Vancouver , Spooky Pinball, Stern Pinball, SunCoast Pinball, Team Pinball, Allied Leisure, Alvin G, Atari, Bally Manufacturing, Bill Port, Capcom, Centro Matic, Coffee-Mat, Chicago Coin, Data East, Exhibit Supply Company, Fascination Int., Inc, Game Plan, Genco, Gottlieb, Hankin, Heighway Pinball, Inder, InterFlip/Recreativos Franco, Jennings & Company, Jeutel pinball, Nordamatic, Nuova Bell/Bell Games, Maresa, Mirco Games, Midway Games, Pinstar, Mr. Game, Peyper, Playmatic, Rally Play, Recel/Petaco, Sega Pinball, Sega, S.A. SONIC, Spinball, Taito, Tecnoplay, The Valley Company, Viza, Wico, Williams Electronics / WMS Industries, Zaccaria, Zidware, Back-glass, Ball, Ban, Bells, Bing, Bonus, Brand name, Bumper, Business, Buyer, Cabinet, Challenge, Chicago, Circuit, Coin-operated, Colorful, Company, Competition, Compression, Computer, Concept, Configuration, Control, Coordination, Cost, Count, Craze, Creativity, Culture, Damage, Degree, Design, Development, Dexterity, Digits, Direction, Display, Elaborate, Electric, Electronic, Elimination, Entertainment, Enthusiastic, Era, Execute, Eye-catching, Fancy, Features, Field, Flipper, Forward,

Friends,Gamble, Game, Game play, Gate, Gottlieb, Graphics, High score, Highlight, Hit, Hit, Hobby, IFPA, International Flipper Pinball Association, Improve, Incline, Industry, Innovation, Interest, Jackpot, Jostle, Joy, Junior, Kicker, Knob, Knocked down, Launch, Layout, Leg leveler, Legitimate, Levels, License, Lights, Logo, Lose, Loss, Machine, Manipulation, Manufacture, Marketing, Mechanical, Mesmerize, Metal balls, Midway, Modern, Multi-level, Noise, Nudge, Objective, Operate, Opportunities, Pachinko, Pads, PAPA Professional and Amateur Pinball Association, Passion, Pastime, Pins, Planar, Plastic, Play field, Player, Plumb, Plunger, Plunger, Points, Practice, Profit, Progress, Propel, Quality, Quest, Quick, Rack up, Ramp, Relay, Reset, Revenue, Ricochet, Rings, Rounds, Rubber, Sales, Score, Seller, Senior, Sensitivity, Sensor, Shoot, Shoot, Shot, Skillful, Slingshot, Slug, Small, Solenoid, Sound, Speed, Spin, Stopper, Stressful, Strike, Style, Sum, Surface, Switch, Table, Talent, Target, Technique, Tilt, Tilt, Time, Transistor, Translite, Trapping, Trigger, Trigger, Type, Unique, Unpredictability, Value, Video, Visible, Williams, Win, Winner, Wiring, Wizard, Wonder, Worthwhile, Yell, Youth, Zeal, Zero, billiards, pinball game, arcade, pachinko, foosball, videogame, minigolf, slot machine, jukebox, gamers, amusement arcade, miniature golf, joystick, retro, pinball machine, Tetris, snooker, pool hall, arcade,

The post When did multi-player games appear for pinball? appeared first on Pinball Adventures.

What were some of the other most popular pinball themes?

Andrew MacBain — Thu, 28 May 2020 04:15:08 +0000

Gottlieb was really good at card themes. They were known for that. Card games like poker, you’re trying to get different hands, a royal flush, they used that name a bunch of times—Card Whiz, Royal Flush, Pop-a-Card.

In the 1950s, Gottlieb would run a machine for maybe three or four weeks in their factory and then make anywhere from 500 to 1,500 machines. They would produce maybe 10 different games a year. By the 1960s, production numbers began to bump up. One thousand was now a low production number, and 2,500 to 3,500 was a good run for any particular game. The games were becoming more popular. They were selling more of them.

By the 1970s, some of the machines were breaking sales records, especially the early Bally licensed stuff. They were selling 10,000 machines, 15,000 machines, and this is an incredible number of machines compared to what they were selling just a few years before. But in the mid-’70s, video games were just on the horizon, and by 1979, microprocessor games like Space Invaders, which was a black-and-white game, really started to cut into the pinball market share.

When Pac-Man came out in 1980, pinball really took a dive. Where just a couple years before they had been selling 8,000, 10,000, 12,000, or 15,000 machines, now manufacturers were having a hard time selling 2,000 machines. So the popularity would go down, and pinball would constantly have to reinvent itself. By the late 1980s, Bally was almost out of business, and Williams bought them just to get the name and basically kill a competitor.

By the early 1990s, pinball was on upswing again. Manufacturers were selling boatloads of machines, with the Adam’s Family being the most popular game of all time. And then in the mid-’90s, home-gaming consoles became popular and once again pinball’s popularity started to slide. People weren’t going out so much to be entertained. Arcades were having a hard time, some even closed.

In 1999, Williams/Bally stopped making pinball machines. They just stopped. They said, “We’re just making slot machines.” Remember, Gottlieb had already gone out of business in 1995. So now there was only one pinball manufacturer left, a company called Data East, which in 1995, was bought by Sega.

By 1999, Sega wanted out, so they basically dumped the pinball company. A long-time Data East guy, Gary Stern, picked it up for a very fair price. So now, Gary Stern is running Stern Pinball. There are no stockholders to answer to, it’s just Gary. Because of that autonomy, his pinball machine company has been able to survive. He’s been able to keep his company afloat even during these poor economic times. That’s good because if Stern Pinball goes under, there’s nobody left making any new machines. There almost has to be a new pinball manufacturer out there to keep pinball alive as a pop cultural icon.

The post What were some of the other most popular pinball themes? appeared first on Pinball Adventures.

When did movie promotion begin for pinball?

Andrew MacBain — Thu, 28 May 2020 04:13:02 +0000

Bally was the first company to do that. They were the first company to get an official licensed theme. During the 1950s, Gottlieb had done some unlicensed themes. They had a game called Guy’s Dolls, and it just happened to come out at the same time as the Broadway play called Guys and Dolls. So they were trying to wrap themselves in the popularity of pop culture at the time without actually having to pay any money for it.

In 1975 Bally was the first company to pay for a license. The game was Wizard, which was based on the Tommy movie by the Who. They paid very little for the licensing at the time, but they were able to promote the machine around the movie. And since it was called Wizard, they actually would go around to different cities and give the machines away at pinball tournaments. They would host pinball tournaments to try and increase the popularity of their brand.

Then all the other companies followed suit. Gottlieb got a license in 1979 for Close Encounters of the Third Kind. Williams did it to a much lesser extent. Bally was the key player in licensing themes. They really felt that they could bring new people in to play pinball if they recognized the theme.

Today, the only pinball manufacturer left is Stern out of Chicago. Just about every game they put out, if not every game they put out, is a licensed theme because they are really strong believers in the idea that themes attract new players to pinball. In other words, you can get somebody to play an Indiana Jones pinball machine because they just walked out of the Indiana Jones movie, that sort of thing.

Bally also did a lot of games based on rock groups. They did a KISS machine, which was hugely popular, and one with Ted Nugent. The payments to these guys were so small. For the Ted Nugent game, everybody on the road crew, the m

anagement, and the band got a machine. That was the licensing fee, probably 15 machines. Stern did the Ted Nugent deal.

The post When did movie promotion begin for pinball? appeared first on Pinball Adventures.

Did Williams and Gottlieb have their own artists?

Andrew MacBain — Thu, 28 May 2020 04:10:34 +0000

Yes, they had preferred artists. During the ’50s, ’60s, and ’70s, artwork wasn’t always created in house. Williams or another company would design a game, and then they would hand the game over to another company that just did art. This second company had their own staff artists. In the case of Gottlieb, they used one particular artist, Roy Parker.

So the look of each manufacturer’s machines took on a personality based on the artist—the theme was almost irrelevant. The art really didn’t have anything to do with the actual game play. It could be about almost anything. Clearly some games were designed with a card game like poker or blackjack or something like that in mind. But with a lot of the themes, the art could’ve been anything. The art company would often come up with names for the games, and they would do all the artwork based on the actual whitewood, which was the name for the raw prototype game without art on it. They would pretty much do whatever they wanted, but they knew what the companies were expecting, so that’s why the companies used the same artists over and over.

There were different artists in different years. Gottlieb started out with Roy Parker, who died in 1965 of cancer. Art Stenholm took over and did a lot of Gottlieb artwork through the rest of the ’60s. So you had these artists who would do games for a particular manufacturer for years and years. By the ’80s, the games were getting more sophisticated with voice and speech, and the theme of the game was more set in concrete, so an artist couldn’t really re-theme a game. So a lot of the artists were brought in house and actually worked at Williams or Gottlieb or Bally, and the artwork on the games became much more entwined with the theme.

The post Did Williams and Gottlieb have their own artists? appeared first on Pinball Adventures.

Who were the major manufacturers for pinball?

Andrew MacBain — Thu, 28 May 2020 04:08:46 +0000

During the 1930s, there were literally hundreds of companies making pinball machines. After World War II, though, there was only a handful. The key players were Gottlieb—the biggest, and pretty much the Cadillac of pinball—and Williams, which was substantially smaller but still an up-and-coming game company. They were the two prime manufacturers. There were smaller players like Chicago Coin, Keeney, and United that made pinball. But really, it was Gottlieb and Williams. Even Bally only made a handful of pinball machines during the 1950s. They made mostly bingos. They looked like pinball machines, but they were really gambling devices. They didn’t have flippers.

The artwork on pinball machines, especially in the ’50s, was fairly racy because the players they were attracting were mostly male bar patrons, ages 20 to 50. There were always lightly clad, well-endowed women on the back glass. The general thought is that Gottlieb had the best artwork. There are some people who collect the machines just because they like the artwork. For them, Gottlieb is pretty much the king.

In the 1960s, Williams started making more machines, and Bally started to get into the market more aggressively. As the bingo machines became clearly illegal, Bally shifted its production over to pinball, and by the mid-1960s, it was starting to make a lot more pinball machines. So now the big three players were Gottlieb, Williams, and Bally, with Chicago Coin as a runner-up. United was bought out by Williams, and Keeney was out of business.

By the 1970s, Gottlieb was still the leader because of its artwork, game play, and quality. Williams was second. But Bally began pushing the envelope as far as artwork was concerned. The company hired a new artist named Dave Christensen, a guy who had been doing slot-machine art in the Bally slot-machine department. They shifted him over to pinball and he really brought Bally pinball machines to the forefront because of his racy artwork, which was much more realistic than the cartoony art that Williams and Gottlieb were creating. The women Christensen drew looked almost real, maybe a bit super-human.

For a while, Bally was up-and-coming, but as soon as the crossover to solid state happened, when companies dumped electromechanical technology for microprocessors, Bally and Williams really took over. Gottlieb fell behind because the operators didn’t view their system as being reliable. Gottlieb’s approach to game design also lagged, but the company eventually went out of business in 1995 because they could never get past the reliability issue.

The post Who were the major manufacturers for pinball? appeared first on Pinball Adventures.

How did pinball evolve in the United States?

Andrew MacBain — Thu, 28 May 2020 04:06:44 +0000

It was a game that morphed from the French game of bagatelle. In the 1930s, it really exploded as a gambling thing, and that’s where pinball got this gambling association.

Coming out of World War II, the gambling laws were changing in the United States. In particular, in 1950, the Johnson Act made it difficult for slot machines or any sort of gambling device to be used in public. It was a federal offense. So, pinball had to shed its gambling association to become a game of skill. In 1947, they came up with this crazy idea of adding flippers to the machine.

Gottlieb came out with the first flipper machine. Instead of just letting the ball fall into a hole worth points or money, now the player actually had some control over the ball. With flippers, you could steer the ball into different point areas. All the companies jumped on this flipper technology—Gottlieb did not patent it. Soon everybody was using flipper machines, and it made all the pre-flipper machines of the ’30s and early ’40s—the pre-1947 stuff—obsolete.

In the ’60s, games became more technologically advanced, and in the ’70s they were still using the same electromechanical principles of coils (which are magnets), relays, and stepper units, which are, more or less, one-bit memory units, in a mechanical sense.

By about 1977, 1978, the companies all dropped the electromechanical stuff and went to solid state, using microprocessors to control the games as opposed to having everything hardwired with relays and stepper units. I collect the pre-solid state games.

The post How did pinball evolve in the United States? appeared first on Pinball Adventures.

Are there a lot of pinball machine collectors?

Andrew MacBain — Thu, 28 May 2020 04:04:06 +0000

Are there a lot of pinball machine collectors?

It is a fairly small hobby. I’m the co-editor of one of the pinball magazines, and the subscription number is 1,200 people worldwide. Now, I know not every collector subscribes, but that gives you an indication that the hobby is not huge. There are people who own pinball machines, but they’re not collectors. I would say there’s a difference between a pinball collector and a pinball owner.

We categorize collectors by digits: single-digit collectors, one to nine machines, or double-digit collectors, 10 to 99 machines. Well, I’m a three-digit collector, which is just sick. There’s something wrong with me. If you’re a three-digit collector, you’ve got issues. I think the largest collection known is around 1,500 machines. But the problem is that after you get so many machines, it’s hard to keep them all working and operating or even to have them all restored in the first place because they are a huge time suck.

We started a pinball club, a local Detroit pinball club. We call it the Detroit Pinball Collectors Club. We’ve got a little clubhouse, and so I’ve got a bunch of games there, too. And I’ve got games at a friend’s house. I’ve got games all over the place, unfortunately, just because the one single thread in pinball collecting is you can never have just one, and you always run out of room. If you’re a real collector, it seems like you’re just always amassing more games. I have a really great time restoring them and playing them. I’m probably an average pinball player, maybe above average, but I’m not great. But it’s fun. It’s a fun thing, and it doesn’t become old quickly like, say, video games.

The post Are there a lot of pinball machine collectors? appeared first on Pinball Adventures.

How long does it take to repair the average pinball machine?

Andrew MacBain — Thu, 28 May 2020 04:02:12 +0000

The quickest someone can restore a machine is maybe a week, and that would be the best-case scenario. It takes time to tear them down. All the mechanical assemblies have to be taken apart, cleaned, and the parts must be replaced and put back together. A lot of times they’ll touch up the play fields with clear coat so it doesn’t look like it’s been touched up.

Most of the machines are commercial devices designed to make money for an operator, and most operators just ran the games into the ground. They didn’t really maintain them or take care of them. When they got done with them, they sold them at auction, or maybe cleaned them up a little, ran a rag across them, put new rubber on, and sold them to a homeowner, who then played the bejebus out of it. Or their kids did. Most of the games that you end up with tend to be pretty tired by the time you get them.

The post How long does it take to repair the average pinball machine? appeared first on Pinball Adventures.

Why People Flip Pinball Machines

Andrew MacBain — Thu, 28 May 2020 03:59:33 +0000

I didn’t really get into to pinball machine collecting until maybe 15 years ago, but when I was a freshman in college, video games were really big. I went to Purdue University. They had a huge arcade there. I always said that Space Invaders and Pac-Man took so much of my money—money that I really didn’t have—that it would have been cheaper to just buy one of those machines.

So one day I went to an auction of coin-operated video games. They had pinball machines there, too, including a 1980 Spider-Man machine. This is about 1988, so the game’s only eight years old. They started bidding at a hundred dollars, and nobody’s bidding. I drag it home and set it up, and sure enough a few things don’t work on it. And of course I don’t know how to fix it, but I go through it, figure it out, and it’s rewarding.

So I started buying these machines, tried to figure out how to fix them, and started to network with other guys who were buying games. I’d say, “Hey, I have this problem, how do you fix that?” You couldn’t find anybody to repair them. As time progressed, I just started buying more games, figuring out how to fix them, and I would run an ad in the paper—“Buying pinball machines, broken or working.” I would get a zillion calls.

Over the course of talking to people, I was developing this library of repair information. Then, in about 1995, I got a new job, and they had this crazy thing at work called Internet access. I’m like, “Wow, I can post all my repair stuff on the Internet.” I made a database and it just kept growing until I ended up with this huge website called PinRepair.com.

As part of the hobby, I went to the Pinball Expo in Chicago. This was about 1999, and they had all these seminars with people involved in the industry—programmers, game designers, service guys. The next year we presented a demonstration at the show about repairing games. As a joke, we said, “We’re going to make a videotape,” just a goofy, comedy videotape on pinball repair. And so we came up with this Norman-Shaggy thing, where I was Shaggy, the guy with long hair, and Norm was the guy who you never, ever saw, but he talked with a Boston accent. It was loosely based on This Old House, so we called it This Old Pinball. It was a weird morph of a bunch of ideas.

We showed the tape after our repair seminar, and people just went nuts, saying, “Hey, can I get a copy?” And we’re like, “We’re not selling this. It was just a one-time thing.” So then this guy comes up to me and says, “Look, I’m running this pinball hall of fame thing in Las Vegas. I’ll sell your video, and I’ll give some of the money to the Salvation Army and some of the money to our nonprofit pinball hall of fame, and you’ll help a lot of people out.”

So we started making these videos, and we turned them into nine, two-hour DVDs. We’ve sold 5,000 of them, or something. It’s unbelievable.

The post Why People Flip Pinball Machines appeared first on Pinball Adventures.

The Glory of the Pinball Machine

Andrew MacBain — Thu, 28 May 2020 03:55:20 +0000

What is it about the pinball machine that draws us in? Even today in our time of gorgeously illustrated video games, pinball machines continue to have an enchanting quality. In part this is the result ofthe game’s visuals: the lights, colors, and artwork. But it’s also a credit to the game’s simple mechanical brilliance — the fun and challenge of timing the action of two levers to guide the pinball into the machine’s most lucrative spots.The game was not always so simple. Early pinball machines demanded that a player shake the entire table in an effort to guide the ball through the obstacles (pins — hence the name). Later iterations had mechanical flippers like today’s, but more of them — six, which were distributed three on each side up and down the body of the machine. It wasn’t until 1948 that the standard two-flipper version was introduced, designed by Steve Kordek in an effort to save on production costs. But the two-flipper machine was a hit; its use of a direct-current (as opposed to alternating, which other companies were using at the time) meant the flippers were more precise in their motion, and, with only two, the game experience was more streamlined.

Kordek passed away in 2014 at the age of 100 in Park Ridge, Illinois. In his career, he moved on from mechanical games to video games, but the double-flipper pinball machine was “perhaps his most significant contribution.” Its success is a testament to the basic importance of getting the hardware right: Without Kordek’s innovation, pinball would be an overdecorated gambling machine. But together, the marriage of artistry and tech provides that particular pinball allure.pinhead, pinball, pinball-playing addict, backbox, Pinball Machine, BIFF, flipper, panic flip, Lazarus ball, Nudging, machine, ball, pinball video games, nudge, shake, bumpers, thumper, jet, pop, kick-out hole, ,gobble hole, drain, Ability, Achievement, Action, Arcade, Arrangement, Art, Artist, Artwork, Attempt, American Pinball, Chicago Gaming Company. Dutch Pinball, Haggis Pinball. HomePin. Jersey Jack Pinball. Multimorphic Inc. Penny K Pinball. Quetzal Pinball, Pinball Avdentures, Punny Factory, Ninja Mania, Sushi Mania, That’s Wack, Canada, Vancouver , Spooky Pinball, Stern Pinball, SunCoast Pinball, Team Pinball, Allied Leisure, Alvin G, Atari, Bally Manufacturing, Bill Port, Capcom, Centro Matic, Coffee-Mat, Chicago Coin, Data East, Exhibit Supply Company, Fascination Int., Inc, Game Plan, Genco, Gottlieb, Hankin, Heighway Pinball, Inder, InterFlip/Recreativos Franco, Jennings & Company, Jeutel pinball, Nordamatic, Nuova Bell/Bell Games, Maresa, Mirco Games, Midway Games, Pinstar, Mr. Game, Peyper, Playmatic, Rally Play, Recel/Petaco, Sega Pinball, Sega, S.A. SONIC, Spinball, Taito, Tecnoplay, The Valley Company, Viza, Wico, Williams Electronics / WMS Industries, Zaccaria, Zidware, Back-glass, Ball, Ban, Bells, Bing, Bonus, Brand name, Bumper, Business, Buyer, Cabinet, Challenge, Chicago, Circuit, Coin-operated, Colorful, Company, Competition, Compression, Computer, Concept, Configuration, Control, Coordination, Cost, Count, Craze, Creativity, Culture, Damage, Degree, Design, Development, Dexterity, Digits, Direction, Display, Elaborate, Electric, Electronic, Elimination, Entertainment, Enthusiastic, Era, Execute, Eye-catching, Fancy, Features, Field, Flipper, Forward,

The post The Glory of the Pinball Machine appeared first on Pinball Adventures.

artist modifies a pinball machine to make art prints

Andrew MacBain — Wed, 29 Apr 2020 10:26:49 +0000

Dutch graphic designer Sam van Doorn has modified a pinball machine so that it uses lithographic ink to make prints. Calling his machine STYN, the device makes messy modern art on poster board with six flippers and the ball. van Doorn doesn’t call the resulting works art, rather he thinks of them as design pieces which are the product of “fun and play.” The modified pinball machine was a part of van Doorn’s graduation project. The machine itself will be appearing at different parties where people can use it to make their own designs, but posters are also available for sale in van Doorn’s website for 50 Euros.

The post artist modifies a pinball machine to make art prints appeared first on Pinball Adventures.

Pinball Cafe closes doors for having more than two pinball machines

Andrew MacBain — Wed, 29 Apr 2020 10:22:28 +0000

The Pinball Cafe opened its doors in February, on the strip of Queen West between Roncesvalles Ave. and Dufferin St. It was a family place where one could buy ice cream, eat a sandwich and play a few rounds of an old arcade favourite.

When it closed on Monday, after eight months of operating illegally without a licence, the owners posted the following to their website and Facebook page: “The Pinball Cafe is CLOSED by order of The City of Toronto based on 1) Zoning By-law No. 438-86 and 2) Interim control By-law #2012.”

The first zoning bylaw referenced states that only two pinball machines or other electronic games are permitted in a restaurant or amusement establishment — a limit that Jason Hazzard describes as “outdated.”

The second reference, the interim control bylaw, was introduced to council on Oct. 31. It states that no restaurants can be opened on the strip of Queen West between Roncesvalles Ave. and Dufferin St. for one year.

“We put a lot of time and money into this little business and we’re sad to see it go,” said Mr. Hazzard, 39, who opened The Pinball Cafe with his wife, Rachel.

Local councillor Gord Perks did not take kindly to that version of events.

“It attempts to lay blame on the city,” he said. “They’re trying to blame someone else for their mistakes.”

The Hazzards met with Mr. Perks in February, when they were seeking a business licence. They were having trouble obtaining one because of their excess of pinball machines. The councillor said he gave the business owners three options: reduce the number of machines to operate within the limit of two; go to the committee of adjustments for a variance on the zoning rules; or ask the city to change the zoning of the property.

Mr. Perks didn’t hear from the business owners again until the summer, when they were having trouble obtaining a liquor licence.

“If you want to get a liquor licence, then you have to get a business licence. And if you want a business licence, you have to get your zoning stuff figured out,” Mr. Perks said.

But the Hazzards didn’t act quickly enough. By the time they decided to reduce the number of pinball machines to obtain a licence, they were turned down because of the interim control bylaw.

Mr. Perks defends the bylaw, saying it addresses a zoning imbalance in the neighbourhood.

“All of the sudden, what was supposed to be a neighbourhood shopping area has turned into an entertainment area,” he said. “The streets are packed all night and empty all day.”

Frank Horgan, who has worked at Amico’s Pizza Restaurant on Queen West for eight years, has noticed the change.

“The area is getting saturated,” he said, noting that there used to be a few restaurants on the street. “And now you need both hands to count them.”

Although the interim bylaw took blame on the website post, Mr. Perks says it has nothing to do with the closure. If the necessary routes to obtain a business licence had been taken last February, they wouldn’t have had to close.

“They never opened legally, and they decided to close themselves,” he said. “It’s heartbreaking to lose a business, but it’s not right to blame the city.”

“We didn’t do our due diligence,” Mr. Hazzard admits.

“We wanted to do something that was fun and interesting and different. There wasn’t anything like it in Toronto.…

“It was a lot of fun. And unfortunately, it was illegal.”

Source

The post Pinball Cafe closes doors for having more than two pinball machines appeared first on Pinball Adventures.

National Pinball Museum to close

Andrew MacBain — Wed, 29 Apr 2020 10:18:42 +0000

Just five months after opening its doors to delighted pinheads and wizards across the D.C. region, Georgetown’s National Pinball Museum is being forced to close.

David Silverman, the Silver Spring man whose dream it was to share his pinball collection with the masses, said Monday that he has received a letter informing him that he will have to vacate his third-floor space at the Shops at Georgetown Park in mid-July.

“This has been a dream of mine for over 30 years and to have it whittled down . . . ,” Silverman said.

Officials at Vornado Realty Trust declined to talk about the lease agreement. “As a policy, we don’t comment on tenant matters,” said Wendi Kopsick, spokeswoman for Vornado.

Silverman said that although his lease extends though December, the landlords are exercising a clause that allows them to terminate the agreement with 60 days’ notice. Silverman said he’s being asked to leave to make way for mall renovations.

For more than three decades, Silverman dreamed of opening a museum to showcase his collection of more than 800 pinball machines and to share the history of a game that was first played by French aristocrats. After a story about Silverman appeared in The Washington Post, a leasing agent at the Georgetown center approached him with the idea of opening the museum at the mall. Silverman spent six months renovating a third-floor space that once housed an FAO Schwarz toy store and put up $300,000 of his own money to make the project happen. The National Pinball Museum opened in December.

The museum features 200 pinball machines, some of which were available for visitors to play, as well as displays detailing the art and history of the game. Silverman also highlighted the work of game designers and artists.

Pinball’s heyday was in the 1960s and 1970s; the arrival of video games marked the end of its reign. Only one company, Illinois-based Stern Pinball, still makes pinball machines, and some collectors pay upward of $5,000 for machines at conventions or on Web sites such as eBay.

Silverman said he remains committed to keeping the museum alive.

Right now he’s focused on making lists: lists of supporters, lists of places where he might be able to move his vast collection, lists of spaces where he might be able to temporarily house his collection.

“I’m not willing to throw in the towel,’’ he said. “I’m not going to shut down. I’m going to find someplace.’’

Source

The post National Pinball Museum to close appeared first on Pinball Adventures.

This is serious business for 9-year-old Caine Monroy

Andrew MacBain — Wed, 29 Apr 2020 10:14:56 +0000

Nine-year-old Caine Monroy is totally nonplussed by the attention his homemade cardboard arcade received this week after the short film “Caine’s Arcade” went viral on the Internet.

The documentary was directed by Nirvan Mullick, an L.A. filmmaker who happened upon Caine’s cardboard arcade when he tried to buy a car handle for his ’96 Corolla from Caine’s dad’s auto parts shop.

The heartwarming 11-minute film got a combined 3.5 million views on Vimeo and YouTube in just four days. That led to hundreds of online articles about the video, which led to television stories about the cardboard arcade by Fox, NBC and CNN.

A scholarship fund for Caine, set up by Mullick, got $140,000 in online donations from people moved by the film, and TMZ reported that Caine made such an impression on the owner of the pinball machine store Pins and Needles that she gave him a pinball machine worth thousands of dollars for free.

But by Friday, the whirlwind had started to die down. No television crews were lined up outside Caine’s dad’s auto parts shop in Boyle Heights, where Caine built the arcade last summer. It was the first time that had happened in days.

Still, Caine, dressed in his custom-made Caine’s Arcade sweatshirt, wasn’t feeling blue now that his 15 minutes had started to fade. After all, fame was never the point. Caine is interested in customers.

Paying customers.

Caine’s dad, George, said Caine has always had a knack for spotting money making opportunities — buying trendy rubber bracelets for 99 cents on eBay and selling them for $5 at swap meets, or turning an old skateboard and a cardboard box into a roaming vending machine where he sold Kit Kats, bottled water and potato chips for a dollar.

Despite the rain and the cold, and the fact that there is no heat in the front of his dad’s store, Caine had seven paying customers at his arcade at 3 on a Friday afternoon, including a father and daughter who heard about the arcade via Facebook, an artist who lives in the neighborhood who heard Brian Williams talking about it on NBC and two college students who found the video on Tumblr.

Caine was running two games at a time — audibly counting off the 20 seconds he gives players to play each game, calculator in hand to keep track of how many turns one player had left on his 500-turn fun pass.

Devon Gomez, a 20-year-old college student who was battling the homemade claw machine, asked how many tickets he’d need to win a box of four Angry Birds stuffed animals sitting on the counter.

“Don’t even think about it,” said Caine. “20,000 tickets. You’d need 5,000 tickets for just one.”

“You have to watch your wallet with this kid,” Gomez said.

Caine just grinned and asked if he wanted another turn.

Source

The post This is serious business for 9-year-old Caine Monroy appeared first on Pinball Adventures.

Simpsons Arcade Game Finally Released for Consoles After 21 Years

Andrew MacBain — Wed, 29 Apr 2020 10:11:17 +0000

It’s been a long time since you could pump quarters into The Simpsons Arcade Game, gleefully mashing buttons with a can of Mountain Dew by your side. Well, prepare to seriously embiggen your gaming library because the Simpsons are coming to the Xbox 360 and PlayStation 3.

Today, Konami’s classic game hits Xbox Live Arcade and the PlayStation Network for download. There have been many Simpsons-branded video games over the years, from Krusty’s Fun House to the oddly fun Simpsons: Hit & Run, but this is the only one most people remember.

There really isn’t much to it. You choose either Homer, Marge, Lisa or Bart and then rampage around Springfield hitting wave after wave of hired goons over the course of eight levels. The story has something to do with Smithers kidnapping Maggie for Mr. Burns but, as with almost every game of its time, the story really isn’t that important.

Is it the most challenging or interesting game? Meh. But it’s a fun trip down memory lane to an era when: a) The Simpsons was still considered edgy and subversive, and b) a true test of skill was how quickly you could repeatedly hit a big red button without injuring your finger.

The new version includes some fun extras like four-player online cooperative play and access to the Japanese version of the game. There are three modes of play: one with unlimited lives, one with a single life and “Quarters” mode where you have 10 virtual quarters to get through the whole game. If you’re not a Simpsons fan, there’s really no reason to download this game. If you are, however, I say to you “Up and at them!”

Source

The post Simpsons Arcade Game Finally Released for Consoles After 21 Years appeared first on Pinball Adventures.

Disney film explores secret world within arcade games

Andrew MacBain — Wed, 29 Apr 2020 10:08:42 +0000

Any classic video gamers who still remember the good days of arcade tokens and joysticks may want to prepare themselves for a nostalgic moment or two. Disney’s newest animated film Wreck-It Ralph hit theaters on Nov. 2. Boasting an all-star cast of video game characters like never before seen (and some that have never been seen at all), this film promises to load up on ammo, step on the turbo and blast beyond viewer expectations.

The story takes place in a small arcade that is home to several classic, quarter-eating video games. However, in the spirit of Toy Story, the characters in these video games come to life every night when no one is watching. With the ability to travel between games using a subway-like extension cord system, the characters eat, drink, talk, and socialize with each other. One such character named Ralph (voiced by John C. Reilly, Step Brothers), despite being reasonably well-mannered and friendly, has the job of being the bad guy for the game Fix-It Felix Jr. For 30 years, the giant, gorilla-shaped Ralph has been shunned by his “co-workers” and generally feared by everyone due to his villainous status. All he really wants is to be accepted and taste some of the love and admiration that is shown in the game to Felix (Jack McBrayer, 30 Rock), the popular and ever-optimistic hero. In a desperate bid to change how people think of him, Ralph abandons his own game and ventures out into the world of the arcade in search of a way to prove his heroism. Throughout his journey, Ralph crosses paths with the battle-hardened, professionally animated heroin of an alien shoot-‘em-up game (Jane Lynch, Glee) and the cute but annoying glitch character of a go-kart racing game (Sarah Silverman, School of Rock), both of whom give Ralph a completely new outlook on life. Travelling from one game to the next while making both friends and enemies along the way, Ralph discovers that his true destiny may not be what he intended.

In terms of story and emotional connection with the audience, Wreck-It Ralph is not an instant Disney classic, but its characters are memorable and the quality of animation is spot-on. The film is about video games and nothing else, so many classic video game tropes are included in a manner that should bring at least a few fond memories to anyone born in the arcade generation. For instance, one of the long-running jokes throughout the film is the cameos by classic video game characters in situations that are slightly different than what most audience members will remember. Sonic the Hedgehog gives safety advice to travelers as they journey between games, Q*bert and Coily are homeless on the streets, and Clyde the Ghost from Pac-Man runs a group therapy session for arcade villains. Even a certain moustached plumber gets a shout-out once or twice. Ultimately, it is these little “special moments” that make Wreck-It Ralph not just another animated film, but rather a salute to an era that was and is an enormous part of countless childhoods.

If there is anything bad to say about Ralph, it is that the story may come off as a little too under-ambitious at points. But this fact could be either a pro or a con based on the viewer. Younger audience members will certainly enjoy the wacky characters and truly vibrant animation, but older viewers may feel that the film does not reach its potential in terms of both laughs and storylines. The idea of a plot taking place in the coded and pixelated world of a video game, where mushrooms grant the power to shoot fists of fire and regeneration is an everyday occurrence, is an interesting one and always worthy of exploration. However, it will be up to the audience to decide if Wreck-It Ralph takes advantage of this idea and offers a fresh and interesting story, or if the film decides to go easy and play it safe in the arcade room.

Source

The post Disney film explores secret world within arcade games appeared first on Pinball Adventures.

Pinball Record Archives - Pinball Adventures

Injection Molding DIY & Process

What Is Injection Molding?

What You Need for DIY Injection Molding

Clamping

Injection

Cooling

Ejection

Low production costs

Low scrap rates

Repeatable and consistent

PINBALL ADVENTURES

How The Pinball Expo Started

How It All Started

The Pinball Expo 2020

The Growth of Pinball Expo

PINBALL ADVENTURES

When did multi-player games appear for pinball?

What were some of the other most popular pinball themes?

When did movie promotion begin for pinball?

Did Williams and Gottlieb have their own artists?

Who were the major manufacturers for pinball?

How did pinball evolve in the United States?

Are there a lot of pinball machine collectors?

Are there a lot of pinball machine collectors?

How long does it take to repair the average pinball machine?

Why People Flip Pinball Machines

The Glory of the Pinball Machine

artist modifies a pinball machine to make art prints

Pinball Cafe closes doors for having more than two pinball machines

National Pinball Museum to close

This is serious business for 9-year-old Caine Monroy

Simpsons Arcade Game Finally Released for Consoles After 21 Years

Disney film explores secret world within arcade games